text text text text
text
text Having a good think about how much effort I had put in on the back brakes, I had a change of heart about the front discs and decided to fit new ones.

As you can see from the first picture top left, the discs are very badly pitted. I had hoped that this would wear down after use, but at this stage it would be just as easy to do it right and fit new ones.

So... off with the split pin, center nuts and washer. These were all put in a seperate tub out of the way so they didn't get lost. Upon re-assembly, the wheel bearings would all get cleaned and re-packed with grease.

go to first page back next